GOLDTAPE 50S
Semi-automatic taping machine for top and bottom sealing by self-adhesive tape of American-type boxes
GT50S is designed to tape particularly low boxes. The machine needs to be adjusted to the different paperboard sizes through cranks.
The operator squares the boxes folding the bottom flaps or the boxes arrive from an automatic case former already squared and with the bottom flaps folded.
While the boxes pass through the machine the top and bottom flaps will be sealed simultaneously by the taping heads.
GT50S can be equipped with different models of taping heads, depending on the minimum box size.
TU 2.1: min W=170mm x H 40mm L = 150 to infinity
min W=110mm x H 70mm L = 150 to infinity
TUe : min W=90mm x H 70mm L = 150 to infinity
min W=150mm x H 40mm L = 150 to infinity
- Machine table made of free metal rollers
- 2 columns frame, 1 with screw, to symmetrically move top taping head
- 4 side pressure rollers (2 + 2) to keep the box top flaps closed
- Special system to lock the top taping head frame in the upper position to facilitate bottom tape reel replacement
- 2 taping heads (top & bottom) TU2.1 for 50mm wide tape – tape leg 25 mm
- Start & Stop button with Stop emergency button in ergonomic & easy to reach position
TECHNICAL DATA
GT50S |
||
TECHNICAL DATA | U.M. | |
Machine footprint (LxWxH) | mm. | 1280x963x1429 |
Machine weight | Kg. | 140 |
Hourly production rate | Boxes/h | 1400 |
Width driving belts | mm. | 40 |
Timing belts speed | m/min. | 18 |
Minimum box dimensions (LxWxH) | mm. | 150 x 90/110 (H 70) x 40 (W 150/170) |
Maximum box dimensions (LxWxH) | mm. | ∞x510x510 |
Maximum weight of the box | Kg. | 6 each 100 mm. length |
Workbench height | mm. | 650 ÷ 750 |
ELECTRICAL DATA | U.M. | |
Voltage | V | 400 |
Phases | n° | 3 |
Frequency | Hz | 50 |
Installed power | kW | 0,18 |
IP rating | IP | 54 |
* The specifications may be subject to change.
GTA-OS
OPPOSITE VERSION
If required the machine can be built in the opposite sided version.
GTA-SC
COLOURS OUT OF THE STANDARD
On request
V-INOX
STAINLESS STEEL
On request.
GTA-SV
VOLTAGE OTHER THAN STANDARD 3-PHASE 400V – 50 Hz
On request
GTA-ULCSA
ULCSA VERSION.
GTA-11
STOP & GO
Timed stop of the belts (energy saving kit).
GTA-11/1
INCREASED SPEED OF THE BELTS
GTA-11/2
DECREASED SPEED OF BELTS
GTA-11/3
PROLONGED MOTORIZATIONS INFEED/OUTFEED
200 mm prolonged motorizations infeed/outfeed (attention could need a connecting roller conveyor).
GTA-11/4
LIFTED MOTORIZATIONS
Lifted motorizations (lifted of 100 mm).
GTA-11/6
INCREASED HEIGHT (H=90 mm)
GTA-16
SET OF 4 TELESCOPIC LEGS WITH FIXED FOOD
Set of 4 telescopic legs with fixed foot, excursion 650/950 mm with ruler.
GTA-03
THREE-FLAP CLOSER (for GT50)
The three flap folding device makes it easier and quicker inserting the filled box in the machine.The operator just has to fold the back flap of the box, while pushing it towards the entry of the taping machine until it reaches the timing belts.The device folds the front and side flaps so that the box is ready to be taped
GTA-04
BOTTOM COVER FOR MACHINE WITHOUT BOTTOM TAPING UNIT
GTA-06
RFN TAPE BREAKAGE/END SIGNAL FOR 1 TAPING HEAD
RFN tape breakage/end signal 1 head.
GTA-07
RFN TAPE BREAKAGE/END SIGNAL FOR 2 HEADS
GTA-16
SET OF 4 TELESCOPIC LEGS WITH FIXED FOOD
Set of 4 telescopic legs with fixed foot, excursion 650/950 mm with ruler.
GTA-17
SET OF LEGS WITH CASTERS Ø 80 mm
Set of four support legs equipped with swivel wheels and brake. They allow fast movement and safe positioning of the machine.
GTA-18
SET OF 4 ADJUSTABLE LEGS WITH CASTERS Ø 100 mm
Set of 4 telescopic legs with casters Ø100 mm, excursion 650/950 mm with ruler.
RULL
RULL
Wide availability of pallets, roller conveyors and extenders to best handle box handling needs.